| Amsoil synthetic lubricants offers outstanding top of the line hydraulic lubricants. Less maintenance, more protection, fantastic heat resistance and much more fluid in cold winter climates. |
(ATH) Synthetic Tractor Hydraulic/Transmission Fluid
(AW) Synthetic Anti-Wear Hydraulic Oils
(TBI) Synthetic Thermally Stable Biodegradable Hydraulic Oil
(WL) Synthetic Blend EP Slideway, Chain and Gear Oils
(AW) Synthetic Anti-Wear Hydraulic Oils
(TBI) Synthetic Thermally Stable Biodegradable Hydraulic Oil
(WL) Synthetic Blend EP Slideway, Chain and Gear Oils
Synthetic Tractor Hydraulic/Transmission Oil
ISO 46, SAE 30
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern
farm and industrial equipment. Engineered specifically to meet the tough applications of
heavy-duty, hydraulic-powered operations. Exceeds the performance requirements of
virtually every piece of modern machinery. Provides exceptional lubrication to reduce
wear, resist heat, protect against rust and extend fluid and equipment service life.
Product Code: ATH
PRODUCT DESCRIPTION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern
farm and industrial equipment. Engineered specifically to meet the tough applications of
heavy-duty, hydraulic-powered operations, AMSOIL Hydraulic/Transmission Oil exceeds
the performance requirements of virtually every piece of modern machinery. With its
unique blend of synthetic base stocks and advanced additive package, AMSOIL
Hydraulic/Transmission Oil provides exceptional lubrication to reduce wear, resist heat,
protect against rust and extend fluid and equipment service life.
Remains Stable at Temperature Extremes
AMSOIL Hydraulic/Transmission Oil operates over a wide range of temperatures. AMSOIL Hydraulic/Transmission Oil
has a low volatility and high viscosity index to maintain its lubricity at high operating temperatures, and it flows at
temperatures as low as -40°F (-40°C) for improved equipment operation and wear protection.
Provides Controlled Seal Swell
AMSOIL Hydraulic/Transmission Oil contains seal swell agents to maintain sealing integrity. It provides a slight seal
swell to maintain a secure, tight fit.
Inhibits Rust and Corrosion
AMSOIL Hydraulic/Transmission Oil contains special rust and corrosion inhibitors to protect tractor components
against rust and corrosion.
Inhibits Foaming
AMSOIL Hydraulic/Transmission Oil inhibits foaming. Foaming reduces hydraulic oil pressure and diminishes the
lubricating protection provided by the oil. AMSOIL Hydraulic/Transmission Oil continues to resist foaming even when
the reservoir level is low.
Suppresses Wet Brake Chatter
AMSOIL Hydraulic/Transmission Oil has friction modifier
additives that effectively suppress wet brake chatter.
When the friction modifier additives are depleted in a
conventional hydraulic/transmission oil, an imbalance of
pressure occurs in the tractor's brake system and vibrating
in the tractor can become uncontrollable. AMSOIL
Hydraulic/Transmission Oil remains serviceable for up to
three times longer than do conventional oils, and its f
riction additives remain intact for smooth, continuous
tractor operation.
APPLICATION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is
Recommended for Applications Requiring the
Following Specifications:
Tractors
Case International - MS-1207, HYTRAN
Caterpillar - TO-2, TO-3
Deutz-Allis - All
Ford - M2C41-B, M2C134-D, M2C86-B
Hesston/Fiat - All
John Deere - Quatrol®, J20C, J20D, J14C
Kubota, UDT - All
Landini - All
Massey-Ferguson - M1127-B, M1129-A, M1135 and M1141 (also known as Permatran III®)
Steiger - All
Versatile - All
Transmissions
Detroit Diesel Allison Division - C-4 Hydraulic Systems
ABEX/Denison - HF-0, HF-1, HF-1A, HF-2, HF-2A
Cincinnati Milacron - P-70
Sundstrand - HMS-103
Sperry New Holland - 767166, 287530
Sundstrand Hydraulics, HMS-103
® Registered Trademarks
PERFORMANCE DATA
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil exceeds the following rigorous
performance requirements:
Caterpillar Friction Retention Test - Pass
Denison Pump Test (T5D Vane Pump, 46 Series Piston Pump) - Pass
Deutz-Allis Friction Retention Test - Pass, Deutz-Allis Turbo Hydra-Matic Oxidation Test - Pass, Deutz-Allis Power
Steering Pump Test - Pass
Ford 7710 IPTO Stall Test - Pass, Ford 7710 Brake Capacity - Pass, Ford 7710 Brake Chatter Test - Pass
John Deere JDQ-42 PTO Clutch (2000) Cycles - Pass, John Deere JDQ-40 Brake Capacity Test - Pass, John Deere
JDQ-40 Brake Torque Variation (Chatter) - Pass, John Deere JDQ-73 Cold Soak @ -35°C - Pass, John Deere JDQ-74
Slow Cool @ -30°C - Pass, John Deere JDQ-74 Slow Cool @ -35°C - Pass
Massey Ferguson MF-285 PTO Clutch - Pass, Massey Ferguson MF-285 Wet Brake Chatter and Torque
Characteristics - Pass
Plessy-Sundstrand Gear Pump Test - Pass
Sundstrand Model 22-2132 Variable Displacement, Piston Pump - Pass
Vickers 35VQ-25, Pump Test - Pass
INSTALLATION
AMSOIL Hydraulic/Transmission Oil is fully compatible with conventional hydraulic/transmission oils. To install
AMSOIL
Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission oil, change filters and install
AMSOIL Hydraulic/Transmission Oil.
TYPICAL TECHNICAL PROPERTIES
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil (ATH)
ISO Grade 46
SAE Viscosity 30
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 9.3
Kinematic Viscosity @ 40°C, cSt (ASTM D-445 )50.1
Viscosity Index (ASTM D-2270) 171
Flash Point °C (°F) (ASTM D 92) 230 (446)
Fire Point °C (°F) (ASTM D 92) 242 (468)
Pour Point °C (°F) (ASTM D 97) -40 (-40)
Four Ball Wear Test (ASTM D 4172B) Scar, mm 0.35
ISO 46, SAE 30
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern
farm and industrial equipment. Engineered specifically to meet the tough applications of
heavy-duty, hydraulic-powered operations. Exceeds the performance requirements of
virtually every piece of modern machinery. Provides exceptional lubrication to reduce
wear, resist heat, protect against rust and extend fluid and equipment service life.
Product Code: ATH
PRODUCT DESCRIPTION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern
farm and industrial equipment. Engineered specifically to meet the tough applications of
heavy-duty, hydraulic-powered operations, AMSOIL Hydraulic/Transmission Oil exceeds
the performance requirements of virtually every piece of modern machinery. With its
unique blend of synthetic base stocks and advanced additive package, AMSOIL
Hydraulic/Transmission Oil provides exceptional lubrication to reduce wear, resist heat,
protect against rust and extend fluid and equipment service life.
Remains Stable at Temperature Extremes
AMSOIL Hydraulic/Transmission Oil operates over a wide range of temperatures. AMSOIL Hydraulic/Transmission Oil
has a low volatility and high viscosity index to maintain its lubricity at high operating temperatures, and it flows at
temperatures as low as -40°F (-40°C) for improved equipment operation and wear protection.
Provides Controlled Seal Swell
AMSOIL Hydraulic/Transmission Oil contains seal swell agents to maintain sealing integrity. It provides a slight seal
swell to maintain a secure, tight fit.
Inhibits Rust and Corrosion
AMSOIL Hydraulic/Transmission Oil contains special rust and corrosion inhibitors to protect tractor components
against rust and corrosion.
Inhibits Foaming
AMSOIL Hydraulic/Transmission Oil inhibits foaming. Foaming reduces hydraulic oil pressure and diminishes the
lubricating protection provided by the oil. AMSOIL Hydraulic/Transmission Oil continues to resist foaming even when
the reservoir level is low.
Suppresses Wet Brake Chatter
AMSOIL Hydraulic/Transmission Oil has friction modifier
additives that effectively suppress wet brake chatter.
When the friction modifier additives are depleted in a
conventional hydraulic/transmission oil, an imbalance of
pressure occurs in the tractor's brake system and vibrating
in the tractor can become uncontrollable. AMSOIL
Hydraulic/Transmission Oil remains serviceable for up to
three times longer than do conventional oils, and its f
riction additives remain intact for smooth, continuous
tractor operation.
APPLICATION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is
Recommended for Applications Requiring the
Following Specifications:
Tractors
Case International - MS-1207, HYTRAN
Caterpillar - TO-2, TO-3
Deutz-Allis - All
Ford - M2C41-B, M2C134-D, M2C86-B
Hesston/Fiat - All
John Deere - Quatrol®, J20C, J20D, J14C
Kubota, UDT - All
Landini - All
Massey-Ferguson - M1127-B, M1129-A, M1135 and M1141 (also known as Permatran III®)
Steiger - All
Versatile - All
Transmissions
Detroit Diesel Allison Division - C-4 Hydraulic Systems
ABEX/Denison - HF-0, HF-1, HF-1A, HF-2, HF-2A
Cincinnati Milacron - P-70
Sundstrand - HMS-103
Sperry New Holland - 767166, 287530
Sundstrand Hydraulics, HMS-103
® Registered Trademarks
PERFORMANCE DATA
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil exceeds the following rigorous
performance requirements:
Caterpillar Friction Retention Test - Pass
Denison Pump Test (T5D Vane Pump, 46 Series Piston Pump) - Pass
Deutz-Allis Friction Retention Test - Pass, Deutz-Allis Turbo Hydra-Matic Oxidation Test - Pass, Deutz-Allis Power
Steering Pump Test - Pass
Ford 7710 IPTO Stall Test - Pass, Ford 7710 Brake Capacity - Pass, Ford 7710 Brake Chatter Test - Pass
John Deere JDQ-42 PTO Clutch (2000) Cycles - Pass, John Deere JDQ-40 Brake Capacity Test - Pass, John Deere
JDQ-40 Brake Torque Variation (Chatter) - Pass, John Deere JDQ-73 Cold Soak @ -35°C - Pass, John Deere JDQ-74
Slow Cool @ -30°C - Pass, John Deere JDQ-74 Slow Cool @ -35°C - Pass
Massey Ferguson MF-285 PTO Clutch - Pass, Massey Ferguson MF-285 Wet Brake Chatter and Torque
Characteristics - Pass
Plessy-Sundstrand Gear Pump Test - Pass
Sundstrand Model 22-2132 Variable Displacement, Piston Pump - Pass
Vickers 35VQ-25, Pump Test - Pass
INSTALLATION
AMSOIL Hydraulic/Transmission Oil is fully compatible with conventional hydraulic/transmission oils. To install
AMSOIL
Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission oil, change filters and install
AMSOIL Hydraulic/Transmission Oil.
TYPICAL TECHNICAL PROPERTIES
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil (ATH)
ISO Grade 46
SAE Viscosity 30
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 9.3
Kinematic Viscosity @ 40°C, cSt (ASTM D-445 )50.1
Viscosity Index (ASTM D-2270) 171
Flash Point °C (°F) (ASTM D 92) 230 (446)
Fire Point °C (°F) (ASTM D 92) 242 (468)
Pour Point °C (°F) (ASTM D 97) -40 (-40)
Four Ball Wear Test (ASTM D 4172B) Scar, mm 0.35
Synthetic AW Series Antiwear Hydraulic Oils
Product Codes: AWF, AWG, AWH, AWI, AWJ
PRODUCT DESCRIPTION
AMSOIL Synthetic AW Series Antiwear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality
synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation (preventing
acid and viscosity increase), inhibits rust, and inhibits foam (preventing spongy hydraulics). AMSOIL AW Oils also
contain a very effective zinc-based antiwear/antioxidant additive which prevents wear in high-speed, high-pressure
vane and gear pumps while meeting the lubrication requirements of axial piston pumps having bronze-on-steel
metallurgy. AMSOIL AW Oils are designed for long life and typically reduce maintenance costs by extending drain
intervals and reducing labor associated with repairs, downtime, and change outs.
Amsoil Synthetic Base Oil Technology
AMSOIL's synthetic base oils resist thermal and oxidative breakdown, preventing carbon or varnish deposits. The very
high viscosity indices, low pour points, and lack of paraffins (wax) make these good all season lubricants well suited for
temperature extremes. At high temperatures and pressures, these oils will provide a good lubricating film and protect
components against wear. During cold temperature operation, equipment will start easier and the need for preheating
with sump heaters is reduced. The AW Series base oils also readily separate from water. This prevents unwanted
oil/water emulsions that inhibit an oil's ability to lubricate, allows for longer lubricant life, and means water can easily be
drained from the sump.
PERFORMANCE FEATURES
Antiwear protection for high-pressure systems
Recommended for gear, vane and piston pumps
Rust, oxidation and foam inhibited
Designed for extreme temperature operations
Hydrolytically stable and readily separates from water
APPLICATIONS OR REQUIREMENTS
Denison HF-0, HF-1 and HF-2
Vickers M-2950-S and I-286-S
Cincinnati Milacron P-68, P-69 and P-70
U.S. Steel 127 and 136
Racine, variable volume vane pumps
DIN 51524, Part 2
AFNOR E 48-603
Ford M-6C32
GM LH-04-1, LH-06-1 and LH-15-1
Lee Norse 100-1
Jeffrey No. 87
BF Goodrich 0152
Commercial Hydraulics *
* Except for PM-500 series silver-containing pumps which require R&O additive systems.
APPLICATION RECOMMENDATION
The correct viscosity grades of AMSOIL Synthetic AW Series Antiwear Hydraulic Oils are recommended for high- and
low-pressure gear, vane and piston stationary and mobile hydraulic systems. They meet the performance
requirements of all major hydraulic manufacturers and are excellent for general purpose use where extended drain
intervals are desired and in severe duty operations where temperature extremes are encountered. Even though
recommended for all-season use, AWF and AWG are the preferred choice for temperatures less than -20° F because
these oils are light-bodied and have very good cold-temperature properties.
Some applications include machine tools and presses, mobile construction equipment, farming equipment, logging
trucks, boom trucks and plastic injection molding machines. The appropriate viscosity grades of AW Oils are also
suitable for use in pneumatic tools, speed reducers, spindles and R & O gear applications.
The ability of the AW Series to extend drain intervals is subject to operating conditions and maintenance practices.
Monitoring by oil analysis is recommended.
AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils, and most synthetic
hydraulic oils1. For optimum performance, it is recommended that the system be thoroughly drained and, if warranted,
cleaned prior to installation.
1 Not compatible with phosphate ester or silicone fluids.
AMSOIL Limited Warranty
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 30-gallon drums (AWH only), 55-gallon drums, 275-gallon totes and
bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
Typical Technical Properties (Based on 10/02 Published Data Bulletin)
Synthetic AW Series Antiwear Hydraulic Oils
AWF
ISO 15 AWG ISO 22 AWH/AHO ISO 32 AWI ISO 46 AWJ ISO 68
ISO VG - ASTM D-2422 15 22 32 46 68
VK 100°C - ASTM D-445 4.5 5.8 6.7 9.1 11.7
VK 40°C - ASTM D-445 15.2 20.9 32.5 47.5 67.0
Viscosity Index - ASTM D-2270 244 250 172 177 172
SPGR - ASTM D-1298 0.8294 0.8363 0.8576 0.8591 0.8670
Density - ASTM D-1298 6.906 6.964 7.141 7.153 7.219
Flash Point °C (°F) - ASTM D-92 172 (341) 174 (345) 244 (471) 238 (460) 242 (467)
Fire Point °C (°F) - ASTM D-92 184 (363) 188 (370) 262 (503) 258 (496) 262 (503)
Pour Point °C (°F) - ASTM D-97 -67 (-89) -65 (-85) -57 (-70) -51 (-60) -48 (-54)
Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.48 0.45 0.44 0.40 0.40
Copper Strip Corrosion Test - ASTM D-130 1A 1A 1A 1A 1A
Foam - ASTM D892 Sequence I, II, III Test End 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Dielectric Strength - ASTM D877 Voltage, kV AC >40 >40 >40 >40 >40
Viscosity - ASTM D445 @ 0°F 72 105 792 1232 2638
Viscosity - ASTM D445 @ -20°F 250 357 2228 3480 10155
Viscosity - ASTM D445 @ -40°F 1906 2020 7881 12690 *
Demulsibility - ASTM D1401 Oil/Water/Cuff (min) 40/40/0 (15) 40/40/0 (15) 40/40/0 (15) 40/40/0 (15) 40/40/0
(20)
Rust Test - ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
* Generally not recommended for hydraulic system use at this temperature
Product Codes: AWF, AWG, AWH, AWI, AWJ
PRODUCT DESCRIPTION
AMSOIL Synthetic AW Series Antiwear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality
synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation (preventing
acid and viscosity increase), inhibits rust, and inhibits foam (preventing spongy hydraulics). AMSOIL AW Oils also
contain a very effective zinc-based antiwear/antioxidant additive which prevents wear in high-speed, high-pressure
vane and gear pumps while meeting the lubrication requirements of axial piston pumps having bronze-on-steel
metallurgy. AMSOIL AW Oils are designed for long life and typically reduce maintenance costs by extending drain
intervals and reducing labor associated with repairs, downtime, and change outs.
Amsoil Synthetic Base Oil Technology
AMSOIL's synthetic base oils resist thermal and oxidative breakdown, preventing carbon or varnish deposits. The very
high viscosity indices, low pour points, and lack of paraffins (wax) make these good all season lubricants well suited for
temperature extremes. At high temperatures and pressures, these oils will provide a good lubricating film and protect
components against wear. During cold temperature operation, equipment will start easier and the need for preheating
with sump heaters is reduced. The AW Series base oils also readily separate from water. This prevents unwanted
oil/water emulsions that inhibit an oil's ability to lubricate, allows for longer lubricant life, and means water can easily be
drained from the sump.
PERFORMANCE FEATURES
Antiwear protection for high-pressure systems
Recommended for gear, vane and piston pumps
Rust, oxidation and foam inhibited
Designed for extreme temperature operations
Hydrolytically stable and readily separates from water
APPLICATIONS OR REQUIREMENTS
Denison HF-0, HF-1 and HF-2
Vickers M-2950-S and I-286-S
Cincinnati Milacron P-68, P-69 and P-70
U.S. Steel 127 and 136
Racine, variable volume vane pumps
DIN 51524, Part 2
AFNOR E 48-603
Ford M-6C32
GM LH-04-1, LH-06-1 and LH-15-1
Lee Norse 100-1
Jeffrey No. 87
BF Goodrich 0152
Commercial Hydraulics *
* Except for PM-500 series silver-containing pumps which require R&O additive systems.
APPLICATION RECOMMENDATION
The correct viscosity grades of AMSOIL Synthetic AW Series Antiwear Hydraulic Oils are recommended for high- and
low-pressure gear, vane and piston stationary and mobile hydraulic systems. They meet the performance
requirements of all major hydraulic manufacturers and are excellent for general purpose use where extended drain
intervals are desired and in severe duty operations where temperature extremes are encountered. Even though
recommended for all-season use, AWF and AWG are the preferred choice for temperatures less than -20° F because
these oils are light-bodied and have very good cold-temperature properties.
Some applications include machine tools and presses, mobile construction equipment, farming equipment, logging
trucks, boom trucks and plastic injection molding machines. The appropriate viscosity grades of AW Oils are also
suitable for use in pneumatic tools, speed reducers, spindles and R & O gear applications.
The ability of the AW Series to extend drain intervals is subject to operating conditions and maintenance practices.
Monitoring by oil analysis is recommended.
AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils, and most synthetic
hydraulic oils1. For optimum performance, it is recommended that the system be thoroughly drained and, if warranted,
cleaned prior to installation.
1 Not compatible with phosphate ester or silicone fluids.
AMSOIL Limited Warranty
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 30-gallon drums (AWH only), 55-gallon drums, 275-gallon totes and
bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
Typical Technical Properties (Based on 10/02 Published Data Bulletin)
Synthetic AW Series Antiwear Hydraulic Oils
AWF
ISO 15 AWG ISO 22 AWH/AHO ISO 32 AWI ISO 46 AWJ ISO 68
ISO VG - ASTM D-2422 15 22 32 46 68
VK 100°C - ASTM D-445 4.5 5.8 6.7 9.1 11.7
VK 40°C - ASTM D-445 15.2 20.9 32.5 47.5 67.0
Viscosity Index - ASTM D-2270 244 250 172 177 172
SPGR - ASTM D-1298 0.8294 0.8363 0.8576 0.8591 0.8670
Density - ASTM D-1298 6.906 6.964 7.141 7.153 7.219
Flash Point °C (°F) - ASTM D-92 172 (341) 174 (345) 244 (471) 238 (460) 242 (467)
Fire Point °C (°F) - ASTM D-92 184 (363) 188 (370) 262 (503) 258 (496) 262 (503)
Pour Point °C (°F) - ASTM D-97 -67 (-89) -65 (-85) -57 (-70) -51 (-60) -48 (-54)
Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.48 0.45 0.44 0.40 0.40
Copper Strip Corrosion Test - ASTM D-130 1A 1A 1A 1A 1A
Foam - ASTM D892 Sequence I, II, III Test End 0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Dielectric Strength - ASTM D877 Voltage, kV AC >40 >40 >40 >40 >40
Viscosity - ASTM D445 @ 0°F 72 105 792 1232 2638
Viscosity - ASTM D445 @ -20°F 250 357 2228 3480 10155
Viscosity - ASTM D445 @ -40°F 1906 2020 7881 12690 *
Demulsibility - ASTM D1401 Oil/Water/Cuff (min) 40/40/0 (15) 40/40/0 (15) 40/40/0 (15) 40/40/0 (15) 40/40/0
(20)
Rust Test - ASTM D665 A & B Fresh Water and Synthetic Sea Water Pass Pass Pass Pass Pass
* Generally not recommended for hydraulic system use at this temperature
Synthetic Thermally Stable Biodegradable
Hydraulic Oil
Product Code: TBI
Denison HF0, HF1, HF2
Vickers M-2950-S, 1286-S
Cincinnati Milacron P-68, P-69, P-70
PRODUCT DESCRIPTION
AMSOIL TBI hydraulic oil is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight,
water and microbial activity. TBI has a very low toxicity level because the oil is formulated with ashless additives that do
not contain heavy metals.
AMSOIL TBI incorporates very high quality synthetic base oils that provide thermal stability, even though they are
biodegradable. This oil also contains antiwear additives that have been thoroughly tested and qualified against
stringent hydraulic oil standards including Denison HF0, HF1, HF2, Vickers M-2950-S, I286-S, and Cincinnati Milacron
P-68, P-69 and P-70. TBI provides optimum protection for your hydraulics because it prevents wear of the pump and
prevents rust of critical components. TBI contains antioxidants that increase the life of the oil and it contains foam
inhibitors that quickly release air from the oil.
TBI outperforms vegetable oil-type, biodegradable hydraulic oils because it is based on high-quality, synthetic oil
chemistry that lasts longer and withstands heat better. This ensures problem-free operation.
PERFORMANCE FEATURES
80% Biodegradable Within 21 days (CEC L-33-A-94)
Thermally Stable
Resists Oxidation
Prevents Rust and Foam
-51°F Pour Point For Cold Temperature Performance
Outperforms Vegetable Type Bio-Hydraulic Oils
APPLICATION RECOMMENDATION
AMSOIL TBI is recommended for gear, vane and piston stationary and mobile hydraulic systems. TBI is a
multi-viscosity, SAE 5W-20 oil and is recommended for use in place of either ISO-32 or IS-46 hydraulic oils.
TBI is essentially compatible with typical hydraulic oils and small amounts of contamination (lines, residue) is
acceptable. However, it is recommended that systems be drained prior to installing TBI. Excessive system
contamination will minimize its biodegradability effectiveness.
TBI is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines
presents an environmental hazard.
TBI has been tested and found compatible with Nitrile (Buna-N), Poly Acrylate, Flourocarbon (Viton) and Silicone seals
which are commonly found in hydraulic systems. Consult your AMSOIL sales representative or AMSOIL INC. when
dealing with systems containing seals not listed.
The ability of TBI to extend drain intervals and excel in performance is subject to operating conditions and
maintenance practices. Monitoring by oil analysis is recommended.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands. For applications and recommendations, contact your local AMSOIL
industrial sales representative or AMSOIL INC.
Typical Technical Properties
(updated as of 05/02)
Synthetic TBI Hydraulic Oil TBI
ISO VG - ASTM D-2422 32/46
SAE Grade 5W-20
Viscometrics 100°C, cSt - ASTM D-445 7.20
Viscometrics 40°C, cSt - ASTM D-445 40.08
Viscosity Index (VI) - ASTM D-2270 144
Specific Gravity - ASTM D-1298 0.9478
Density - ASTM D-1298 7.893
Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.41
Flash Point °C (°F) - ASTM D-92 268°C (514°F)
Fire Point °C (°F) - ASTM D-92 289°C (552°F)
Pour Point °C (°F) - ASTM D-97 -46°C (-51°F)
Copper Strip Corrosion Test - ASTM D-130 1A
Foam - ASTM D892 Sequence I, II, III Test End 0/0/0
Demulsibility - ASTM D1401 Oil/Water/Cuff (min) 40/40/0 (10)
Dielectric Strength, KV - ASTM D887 36KV
Biodegradability % - CEC L-33-T-82 80
Hydraulic Oil
Product Code: TBI
Denison HF0, HF1, HF2
Vickers M-2950-S, 1286-S
Cincinnati Milacron P-68, P-69, P-70
PRODUCT DESCRIPTION
AMSOIL TBI hydraulic oil is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight,
water and microbial activity. TBI has a very low toxicity level because the oil is formulated with ashless additives that do
not contain heavy metals.
AMSOIL TBI incorporates very high quality synthetic base oils that provide thermal stability, even though they are
biodegradable. This oil also contains antiwear additives that have been thoroughly tested and qualified against
stringent hydraulic oil standards including Denison HF0, HF1, HF2, Vickers M-2950-S, I286-S, and Cincinnati Milacron
P-68, P-69 and P-70. TBI provides optimum protection for your hydraulics because it prevents wear of the pump and
prevents rust of critical components. TBI contains antioxidants that increase the life of the oil and it contains foam
inhibitors that quickly release air from the oil.
TBI outperforms vegetable oil-type, biodegradable hydraulic oils because it is based on high-quality, synthetic oil
chemistry that lasts longer and withstands heat better. This ensures problem-free operation.
PERFORMANCE FEATURES
80% Biodegradable Within 21 days (CEC L-33-A-94)
Thermally Stable
Resists Oxidation
Prevents Rust and Foam
-51°F Pour Point For Cold Temperature Performance
Outperforms Vegetable Type Bio-Hydraulic Oils
APPLICATION RECOMMENDATION
AMSOIL TBI is recommended for gear, vane and piston stationary and mobile hydraulic systems. TBI is a
multi-viscosity, SAE 5W-20 oil and is recommended for use in place of either ISO-32 or IS-46 hydraulic oils.
TBI is essentially compatible with typical hydraulic oils and small amounts of contamination (lines, residue) is
acceptable. However, it is recommended that systems be drained prior to installing TBI. Excessive system
contamination will minimize its biodegradability effectiveness.
TBI is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines
presents an environmental hazard.
TBI has been tested and found compatible with Nitrile (Buna-N), Poly Acrylate, Flourocarbon (Viton) and Silicone seals
which are commonly found in hydraulic systems. Consult your AMSOIL sales representative or AMSOIL INC. when
dealing with systems containing seals not listed.
The ability of TBI to extend drain intervals and excel in performance is subject to operating conditions and
maintenance practices. Monitoring by oil analysis is recommended.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands. For applications and recommendations, contact your local AMSOIL
industrial sales representative or AMSOIL INC.
Typical Technical Properties
(updated as of 05/02)
Synthetic TBI Hydraulic Oil TBI
ISO VG - ASTM D-2422 32/46
SAE Grade 5W-20
Viscometrics 100°C, cSt - ASTM D-445 7.20
Viscometrics 40°C, cSt - ASTM D-445 40.08
Viscosity Index (VI) - ASTM D-2270 144
Specific Gravity - ASTM D-1298 0.9478
Density - ASTM D-1298 7.893
Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) 0.41
Flash Point °C (°F) - ASTM D-92 268°C (514°F)
Fire Point °C (°F) - ASTM D-92 289°C (552°F)
Pour Point °C (°F) - ASTM D-97 -46°C (-51°F)
Copper Strip Corrosion Test - ASTM D-130 1A
Foam - ASTM D892 Sequence I, II, III Test End 0/0/0
Demulsibility - ASTM D1401 Oil/Water/Cuff (min) 40/40/0 (10)
Dielectric Strength, KV - ASTM D887 36KV
Biodegradability % - CEC L-33-T-82 80
SEMI-SYNTHETIC WL SERIES SLIDEWAY,
CHAIN AND GEAR LUBE
PRODUCT DESCRIPTION
AMSOIL Semi-Synthetic WL Series is a high-quality, heavy duty lubricant composed of synthetic base oils, large
molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine
tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength
needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WL
Oils reduce friction for good overall performance.
Machine Tool Slideways
AMSOIL formulated the WL Series with additives designed to prevent the stick/slip or chatter phenomena that
commonly occur at the beginning and end of a machine tool stroke. This happens because the lubricant and additives
are squeezed out during boundary lubrication conditions. Metal to metal contact then occurs, also causing wear to the
slideways. AMSOIL uses EP additives that form a hard boundary layer of protection and tackifying agents that improve
the adhesion properties of the oil. These additives prevent stick/slip and wear. Additionally, the WL Oils are anti-rust
fortified and have excellent resistance to water washout. This is important since emulsified cutting fluids are commonly
used and components are generally exposed to the environment.
Chain and Gear Lubrication
The performance characteristics of the WL Series make them ideal for chain and gear applications. These oils are
friction-reducing, compatible with seals and paints and are resistant to water. The tackifier agents used ensure the
components have constant lubrication, allowing the EP additives to prevent wear and the corrosion inhibitors to
prevent rust. The semi-synthetic nature of the WL Oils delivers excellent performance in a wide variety of
environments.
PERFORMANCE FEATURES
Tackified for excellent adhesion and water resistance
Rust and corrosion inhibited
EP additives prevent stick/slip and slideway scoring
Semi-synthetic adds lubricity and reduces friction
Recommended for slideways, chains and EP gear applications
APPLICATION RECOMMENDATION
AMSOIL WL Series Oils are recommended for use on machine tools where mating surfaces operate under heavy loads
and slow speeds. Some applications include the plain bearing slideways of lathes, shapers, grinders and milling
machines plus the slideways of saws and carriages found in lumber mills. AMSOIL WL Oils are recommended for use
on open or enclosed chain drives and in EP gear box applications where tackified EP gear oils are recommended or
where they do not pose a problem.
Note: Do not use the WL Oils on yellow metal or worm gear applications operating at or above 200° F.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
TYPICAL TECHNICAL PROPERTIES (Revised 8/02)
AMSOIL Semi-Synthetic WL Series Chain Oils WLJ
ISO 68
ISO VG - ASTM D-2422 68
Kinematic Viscosity @ 100° C, cSt (ASTM D-445) 9.32
Kinematic Viscosity @ 40° C, cSt (ASTM D-445) 68.78
Viscosity Index (ASTM D-2270) 113
SPGR - ASTM D-1298 0.8833
Density - ASTM D-1298 7.355
Flash Point, °C (°F) (ASTM D-92) 240 (464)
Fire Point, °C (°F) (ASTM D-92) 250 (482)
Pour Point, °C (°F) (ASTM D-97) -24 (-11)
Four Ball Wear Test, scar diameter in mm (ASTM D-4172: 40 kg, 1200 rpm, 75° C, 60 min.) 0.40
Copper Strip Corrosion Test - ASTM D-130 1B
Timken OK Load, EP - ASTM D-2782 65 lbs.
CHAIN AND GEAR LUBE
PRODUCT DESCRIPTION
AMSOIL Semi-Synthetic WL Series is a high-quality, heavy duty lubricant composed of synthetic base oils, large
molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine
tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength
needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WL
Oils reduce friction for good overall performance.
Machine Tool Slideways
AMSOIL formulated the WL Series with additives designed to prevent the stick/slip or chatter phenomena that
commonly occur at the beginning and end of a machine tool stroke. This happens because the lubricant and additives
are squeezed out during boundary lubrication conditions. Metal to metal contact then occurs, also causing wear to the
slideways. AMSOIL uses EP additives that form a hard boundary layer of protection and tackifying agents that improve
the adhesion properties of the oil. These additives prevent stick/slip and wear. Additionally, the WL Oils are anti-rust
fortified and have excellent resistance to water washout. This is important since emulsified cutting fluids are commonly
used and components are generally exposed to the environment.
Chain and Gear Lubrication
The performance characteristics of the WL Series make them ideal for chain and gear applications. These oils are
friction-reducing, compatible with seals and paints and are resistant to water. The tackifier agents used ensure the
components have constant lubrication, allowing the EP additives to prevent wear and the corrosion inhibitors to
prevent rust. The semi-synthetic nature of the WL Oils delivers excellent performance in a wide variety of
environments.
PERFORMANCE FEATURES
Tackified for excellent adhesion and water resistance
Rust and corrosion inhibited
EP additives prevent stick/slip and slideway scoring
Semi-synthetic adds lubricity and reduces friction
Recommended for slideways, chains and EP gear applications
APPLICATION RECOMMENDATION
AMSOIL WL Series Oils are recommended for use on machine tools where mating surfaces operate under heavy loads
and slow speeds. Some applications include the plain bearing slideways of lathes, shapers, grinders and milling
machines plus the slideways of saws and carriages found in lumber mills. AMSOIL WL Oils are recommended for use
on open or enclosed chain drives and in EP gear box applications where tackified EP gear oils are recommended or
where they do not pose a problem.
Note: Do not use the WL Oils on yellow metal or worm gear applications operating at or above 200° F.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
TYPICAL TECHNICAL PROPERTIES (Revised 8/02)
AMSOIL Semi-Synthetic WL Series Chain Oils WLJ
ISO 68
ISO VG - ASTM D-2422 68
Kinematic Viscosity @ 100° C, cSt (ASTM D-445) 9.32
Kinematic Viscosity @ 40° C, cSt (ASTM D-445) 68.78
Viscosity Index (ASTM D-2270) 113
SPGR - ASTM D-1298 0.8833
Density - ASTM D-1298 7.355
Flash Point, °C (°F) (ASTM D-92) 240 (464)
Fire Point, °C (°F) (ASTM D-92) 250 (482)
Pour Point, °C (°F) (ASTM D-97) -24 (-11)
Four Ball Wear Test, scar diameter in mm (ASTM D-4172: 40 kg, 1200 rpm, 75° C, 60 min.) 0.40
Copper Strip Corrosion Test - ASTM D-130 1B
Timken OK Load, EP - ASTM D-2782 65 lbs.
SEMI-SYNTHETIC WL SERIES SLIDEWAY,
CHAIN AND GEAR LUBE
PRODUCT DESCRIPTION
AMSOIL Semi-Synthetic WL Series is a high-quality, heavy duty lubricant composed of synthetic base oils, large
molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine
tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength
needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WL
Oils reduce friction for good overall performance.
Machine Tool Slideways
AMSOIL formulated the WL Series with additives designed to prevent the stick/slip or chatter phenomena that
commonly occur at the beginning and end of a machine tool stroke. This happens because the lubricant and additives
are squeezed out during boundary lubrication conditions. Metal to metal contact then occurs, also causing wear to the
slideways. AMSOIL uses EP additives that form a hard boundary layer of protection and tackifying agents that improve
the adhesion properties of the oil. These additives prevent stick/slip and wear. Additionally, the WL Oils are anti-rust
fortified and have excellent resistance to water washout. This is important since emulsified cutting fluids are commonly
used and components are generally exposed to the environment.
Chain and Gear Lubrication
The performance characteristics of the WL Series make them ideal for chain and gear applications. These oils are
friction-reducing, compatible with seals and paints and are resistant to water. The tackifier agents used ensure the
components have constant lubrication, allowing the EP additives to prevent wear and the corrosion inhibitors to
prevent rust. The semi-synthetic nature of the WL Oils delivers excellent performance in a wide variety of
environments.
PERFORMANCE FEATURES
Tackified for excellent adhesion and water resistance
Rust and corrosion inhibited
EP additives prevent stick/slip and slideway scoring
Semi-synthetic adds lubricity and reduces friction
Recommended for slideways, chains and EP gear applications
APPLICATION RECOMMENDATION
AMSOIL WL Series Oils are recommended for use on machine tools where mating surfaces operate under heavy loads
and slow speeds. Some applications include the plain bearing slideways of lathes, shapers, grinders and milling
machines plus the slideways of saws and carriages found in lumber mills. AMSOIL WL Oils are recommended for use
on open or enclosed chain drives and in EP gear box applications where tackified EP gear oils are recommended or
where they do not pose a problem.
Note: Do not use the WL Oils on yellow metal or worm gear applications operating at or above 200° F.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
TYPICAL TECHNICAL PROPERTIES (Revised 8/02)
AMSOIL Semi-Synthetic WL Series Chain Oils WLJ
ISO 68
ISO VG - ASTM D-2422 68
Kinematic Viscosity @ 100° C, cSt (ASTM D-445) 9.32
Kinematic Viscosity @ 40° C, cSt (ASTM D-445) 68.78
Viscosity Index (ASTM D-2270) 113
SPGR - ASTM D-1298 0.8833
Density - ASTM D-1298 7.355
Flash Point, °C (°F) (ASTM D-92) 240 (464)
Fire Point, °C (°F) (ASTM D-92) 250 (482)
Pour Point, °C (°F) (ASTM D-97) -24 (-11)
Four Ball Wear Test, scar diameter in mm (ASTM D-4172: 40 kg, 1200 rpm, 75° C, 60 min.) 0.40
Copper Strip Corrosion Test - ASTM D-130 1B
Timken OK Load, EP - ASTM D-2782 65 lbs.
CHAIN AND GEAR LUBE
PRODUCT DESCRIPTION
AMSOIL Semi-Synthetic WL Series is a high-quality, heavy duty lubricant composed of synthetic base oils, large
molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine
tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength
needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WL
Oils reduce friction for good overall performance.
Machine Tool Slideways
AMSOIL formulated the WL Series with additives designed to prevent the stick/slip or chatter phenomena that
commonly occur at the beginning and end of a machine tool stroke. This happens because the lubricant and additives
are squeezed out during boundary lubrication conditions. Metal to metal contact then occurs, also causing wear to the
slideways. AMSOIL uses EP additives that form a hard boundary layer of protection and tackifying agents that improve
the adhesion properties of the oil. These additives prevent stick/slip and wear. Additionally, the WL Oils are anti-rust
fortified and have excellent resistance to water washout. This is important since emulsified cutting fluids are commonly
used and components are generally exposed to the environment.
Chain and Gear Lubrication
The performance characteristics of the WL Series make them ideal for chain and gear applications. These oils are
friction-reducing, compatible with seals and paints and are resistant to water. The tackifier agents used ensure the
components have constant lubrication, allowing the EP additives to prevent wear and the corrosion inhibitors to
prevent rust. The semi-synthetic nature of the WL Oils delivers excellent performance in a wide variety of
environments.
PERFORMANCE FEATURES
Tackified for excellent adhesion and water resistance
Rust and corrosion inhibited
EP additives prevent stick/slip and slideway scoring
Semi-synthetic adds lubricity and reduces friction
Recommended for slideways, chains and EP gear applications
APPLICATION RECOMMENDATION
AMSOIL WL Series Oils are recommended for use on machine tools where mating surfaces operate under heavy loads
and slow speeds. Some applications include the plain bearing slideways of lathes, shapers, grinders and milling
machines plus the slideways of saws and carriages found in lumber mills. AMSOIL WL Oils are recommended for use
on open or enclosed chain drives and in EP gear box applications where tackified EP gear oils are recommended or
where they do not pose a problem.
Note: Do not use the WL Oils on yellow metal or worm gear applications operating at or above 200° F.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon
totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout
the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on
customer requests and regional demands.
TYPICAL TECHNICAL PROPERTIES (Revised 8/02)
AMSOIL Semi-Synthetic WL Series Chain Oils WLJ
ISO 68
ISO VG - ASTM D-2422 68
Kinematic Viscosity @ 100° C, cSt (ASTM D-445) 9.32
Kinematic Viscosity @ 40° C, cSt (ASTM D-445) 68.78
Viscosity Index (ASTM D-2270) 113
SPGR - ASTM D-1298 0.8833
Density - ASTM D-1298 7.355
Flash Point, °C (°F) (ASTM D-92) 240 (464)
Fire Point, °C (°F) (ASTM D-92) 250 (482)
Pour Point, °C (°F) (ASTM D-97) -24 (-11)
Four Ball Wear Test, scar diameter in mm (ASTM D-4172: 40 kg, 1200 rpm, 75° C, 60 min.) 0.40
Copper Strip Corrosion Test - ASTM D-130 1B
Timken OK Load, EP - ASTM D-2782 65 lbs.
| Retail and commercial businesses can enroll for FREE, as accounts for factory direct wholesale pricing with no obligations or minimum purchases. |
| Save about 20% to 25% off our regular retail when you join the Amsoil Synthetic Lubricants Preferred Customer Discount Program |
| Become an individual Amsoil Synthetic Lubricants Dealer and start your very own business. No minimums, no stocking, no quotas, no hassles. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Toll Free 1-877-853-9702 |
| Local 586-268-1295 |
| Proven #1 Since 1972 ! ATV Racing Boating Motorcycle Snowmobile Personal Watercraft Family Fleet |
| Proven #1 Since 1972 ! Automotive Trucking Farming Industrial Antiques Commercial Fleets Municipal Fleets |
| There is only one #1 - MSOIL Proven time and again in actual S.A.E. Testing We are the best in every single category !!! The difference is we can prove it. High performance products! You will actually notice a difference when you use them. |
